Pikar Ltd.

REQUIREMENTS TO ORIGINAL LAYOUTS

1. Carriers:
floppy disk 3.5, CD-R, CD-RW.
All the carriers must be formatted for IBM PC

2. Programmes
Corel DRAW - (for PC platform only);
Adobe Illustrator
Adobe Photoshop
A layout in other programmes can be accepted only after coordination with a designer.

3. Types for all the formats of vector graphics should be transformed into curves. In Photoshop programme types should be transformed into paths. Types for publication should be attached in a separate folder. All enclosed raster images should be recorder on the carrier as separate files with a zoom of 1:1. Raster images are to be recorded along with saved layers, masks and paths (without merging), with extension of 3000 dpi for photo images and pictures and 800 dpi for logotypes and scanned vector images.

4. The minimum thickness of the line is 0,3mm (0,4mm in reverse), 0,2mm for full-colour printing (0,3mm in reverse); the minimum size of the full stop is 0,3mm (0,4mm in reverse); gradients flowings in light parts are to be no less than 3%.

5. All OL should be followed by a listing with all the necessary sizes indicated (Colour listings can not be considered as originals of the colours).

6. If a further redesign or reprocessing of the OL is required the assignement is to be given in a written form.

7. Screened materials are to be provided in CIE Lab, RGB space.CMYK files (that is, colour-separated already) are allowed, at that, quality of the colour rendering when using flexographic printing will visibly differ from offset one.

8. When preparing the files for spot colour printing, all the colours of flowing and contours are to be specified as pantone using the scale of Pantone Formula Guide for enamel-paper.

9. Slides and photoprints are provided for scanning along with negatives and polygraphic imprints which follow a consultation with a designer.

The minimum reproducible thickness of lines will be indicated additionally after the coordination with company’s technologist.

All-Union State Standard 10354-82

№	Figures title	Standard
1	Density at 20 ⁰С, kg/m³	919—929
2	Temperature of smelting, ⁰С	108—112
3	Temperature at which deformation begins (under the action of its own weight), ⁰С	90-100
4	Temperature of frost resistance, ⁰С	Minus 70
5	Working temperature range, ⁰С	From minus 60 to plus 80
6	Coefficient of elasticity during stretching, Mpa (KGP/cm²)	147—294 (1500—3000)
7	Yield point during stretching, Mpа (kgp/сm²)	8,8—11,9 (90—120)
8	Linear shrinkage at 100⁰С, %	< 3
9	Resistance to breakage. N/m (kgp/cm	6950—8900 (70—90)
10	Gas permeability, м2*Pа^-1с^-1 nitrogen oxygen carbon dioxide hydrogen	310^-11 - 110^-12810^-14 - 510^-12310^-13 - 210^-12210^-13 - 110^-12
11	Vapour permeability, g/m²*24h	0,5-30
12	Water absorption for 24h at 20⁰С, %	0,01
13	Dielectric permeability at 10⁶ Gs and 20 ⁰С	2,2
14	Tangent of angle of dielectric losses at 10⁶ Gs and 20 ⁰С	0.0003
15	Specific volumetric electrical resistance 20⁰С, Om*m	110^-18 - 110^-19
16	Electric strength, kV/mm, no less than: at alternating current, at frequency 50 Gs и 20 ⁰С at direct current, at 20⁰С	200 300
17	Coefficient of integral optical transmission, %, and less: for films with thickness: 0,02-0,1 мм > 0,10 до 0,20 mm > 0,20 > 0,35 mm > 0,35 > 0,50 mm	92 90 88 84
18	Chemical durability Persistent to acids (except for nitric and sulphuric acids) and alkalis of various concentration, nonsoluble in organic solvents (swells partly in aromatic and chlorinated hydrocarbons).

Delivering

The shipment of finished manufactures is operated from the storehouse in Moscow from 10am till 6pm, address: 11, Kransoyarskaya str. The driver is to have on him a letter of attorney to receive the cargo.
Chargeable delivering:
Cargo weighing 250-300 kilos, in Moscow and Moscow surrounding – 500 roubles.
Cargo weighing 300-1500 kilos, in Moscow and Moscow surrounding – 1500 roubles.

NEW: Regional customers are given an opportunity of free delivering up to the transport company in Moscow.